Are you looking for the best infrared thermometer in the market? Look no further than Fluke 62 Max Plus. The thermometer is one of the advanced infrared thermometers in the market. Several features make it stand out than any other. Here are some of them.
Fluke 62 Max is a user-friendly infrared thermometer. It has straightforward controls, which are easy to set up in a matter of seconds. For instance, all you require to take the temperature readings is to point and shoot the thermometer to a desired point of interest. The average, difference, minimum, and maximum readings enable the user to scan the area faster and identify any leakage in temperature in certain areas of the room. The ergonomic of the handle of the thermometer enables comfortable holding of the temperature gun over a long time.
The Fluke 62 Max plus is from very good built quality, It feels rugged on nothing makes a noise when you twist and press on the case. The case is “rubberized” that makes this thermometer sits securely in your hand, even when you are wearing gloves. As it is some kind of gun-grip, the fluke infrared thermometer is designed to be used one handed. You can easily press the buttons under the LCD with just your thumb.
The Fluke 62 Max plus provides easy to read highly accurate readings. Most consumers who have purchased and used the thermometer, agrees that the thermometer has exceptionally good and accurate performance. Most of these readings are based on self-assessment. The Fluke 62 Max+ has a large back-lit liquid crystal display (LCD). This feature allows the user to take the temperature readings faster and with a lot of ease, even in extreme darkness.
The laser marks are two points define the diameter of the area that is measured by the 62Max+ at the current distance. With increasing distance you can increase also. The lens of this infrared thermometer has a 12:1 magnification that mean, you will have an 1cm sample-spot at a distance of 12cm.
About the functions
Fluke 62Max plus allows you to just take a sample and see the measurement or you can keep the trigger pressed and scan an area. The thermometer will display three readings per second. After the scan you need to press the “SEL” Button to select between the secondary display. The Thermometer shows the Minimum, Maximum, Average and Difference temperature. These mode is very helpful to find hot or cold spots or to find out temperature difference on your area. Fluke 62 Max+ also allows to set a Min/Max Alarm on the Thermometer. This feature is very useful for those who need to check for overheating parts.
Those who are familiar with the qualities of the best infrared thermometer will agree that, these kinds of temperatures readers are highly accurate. However, most of them usually fail this test. This is because the infrared thermometer may be recording EMS of varying degrees unlike a common object such as a motor or wall. A number of infrared temperatures readers work best with a particular emissivity range. The reference value is 0.95.
Brighter and polished surfaces such as stainless steel utensils have lower emissivity values. The Fluke 62 Max+ thermometer offer greater flexibility in such scenarios. All the user needs to do is adjust the emissivity talus. Emissivity range of 0.10 – 1.00 is considerable acceptable. Thus, it is possible to record a more accurate temperature figures from nearly all surfaces. You can find various charts online that detail the emissivity values. Adjustable emissivity gives a Fluke 62 Max+ thermometer more advantage over other similar types of infrared thermometers.
Durable and long lasting
The Fluke 62 Max plus thermometer is a temperature recorder made by an art of design. It is designed to perform and last over a longer period. It is rated as IP54 which means it will be protected from splash-water, that means this thermometer can be used in rain also. Fluke claims that the thermometer can drop down from as high as 3 meters or 9.8 ft but fail to break.
- IP54 rated for dust and water resistance
- Small and lightweight making it easy to clip to your tool belt or belt loop
- Precise laser technology makes for more accurate and repeatable measurements
- Large Backlit display makes it easier to read data, even in dark areas
- Dual rotating lasers to help you identify area to be measured
- Infrared thermometer for noncontact surface temperature measurement for use in monitoring electrical, mechanical, HVAC, and automotive systems
- Measures temperature from -30 to 650 degrees C (-22 to 1202 degrees F) with an accuracy of + or – 1 degree C or + or -1.0% of the reading from 0 to 650 degrees C
- Dual lasers rotate to pinpoint the edges of the measurement area
- Displays the minimum, the maximum, the difference between the two temperatures, and the average temperatures
- Certified IP54 for protection against dust and splashing liquid
If you are seeking for a robust infrared thermometer that last for years, then the Fluke 62 Max Plus is the perfect thermometer. The price of this infrared thermometer is at higher end, but its worth better than most cheap Chinese models. This thermometer may not be the best choice for those who just want to play around, but for professional who needs accurate temperature every time.